Air Treatment Unit

** To maximize the life of your pneumatic systems on your CNC it is ideal to have dry air filters inline with your compressor connected to your machine! **

Vacuum Pump

** Bearings should be greased with the grease tube provided ~ 2 months. 2 pumps per port, do not over grease. Grease ports are covered by red cap covers. **

X & Y Axes

Electrospindle

** PROCEDURE BELOW MUST BE PERFROMED IF YOUR MACHINE IS DOWN FOR MORE THAN 6 MONTHS **

Spindle Clamp Lubrication Procedure

Tool Holder Maintenance

Boring Head Maintenance