Replacing end trimming and top and bottom cutters on ME 35

• Related Articles

• Replacing or fitting blades on Nova SI 400EP

  Replacing or fitting blades on Nova SI 400EP

• New Edgebander Plan

  Paying a little attention to proper setup and regular maintenance will go along way to keeping your edgebander productive. Edgebanders are the central machine in today’s panel-driven cabinet shop, but they are a complex machine and have a reputation ...

• Things to look for when choosing an edgebander

  If you are in the market for a new edgebander here are a few of the questions to ask yourself and what to look for when shopping. What thickness of edges am I looking to apply? Basic edgebanders are intended for applying thin tape (around .5mm) As ...

• Helical Head vs Straight Knife Cutterheads

  A helical head planer and a straight knife planer are two different types of woodworking tools used for thicknessing wood. Here are the key differences between the two: Blade design: The most significant difference between the two planers is the ...

• Substituting the glue on an ME 35

  Substituting the glue on an ME 35 - DO NOT clean the glue tank with metal tools, since they will damage it. Use a wooden scraper. Over time the glue deteriorates and loses it adhesive properties; proceed as follows to completely empty the glue tank ...